About KlassicView 53mm Sliding Window

The KlassicView 53mm Sliding Window combines functionality and premium quality with a modern slimline design. With a wide range of interlocks available, the 53mm Sliding Window also allows for the installation of a fly screen.  Designed for Australian climatic conditions, the KlassicView double hung window has been tested and exceeds Australian Standard AS0247.
Like all other KlassicView systems, it features an inbuilt weather flap, that reduces air and water penetration.

Design Features:

  • null
    Accepts glass thickness 4mm~10.38mm Single Glazed
  • null
    Frame Height to 1500mm, Panel Width 1200mm
  • null
    Fly Screen available
  • null
    Slim profile for aesthetics
  • null
    Built in weather flap for air and water protection
  • null
    A range of Interlocks available
  • null
    Both have a mullion lock
  • null
    Compatible with other KlassicView Systems

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Download CAD Drawing

Please note: file will be in .zip format.

About

About KlassicView 53mm Sliding Window

The KlassicView 53mm Sliding Window combines functionality and premium quality with a modern slimline design. With a wide range of interlocks available, the 53mm Sliding Window also allows for the installation of a fly screen.  Designed for Australian climatic conditions, the KlassicView double hung window has been tested and exceeds Australian Standard AS0247.
Like all other KlassicView systems, it features an inbuilt weather flap, that reduces air and water penetration.

Design Features:

  • null
    Accepts glass thickness 4mm~10.38mm Single Glazed
  • null
    Frame Height to 1500mm, Panel Width 1200mm
  • null
    Fly Screen available
  • null
    Slim profile for aesthetics
  • null
    Built in weather flap for air and water protection
  • null
    A range of Interlocks available
  • null
    Both have a mullion lock
  • null
    Compatible with other KlassicView Systems
Wers Ratings

WERS Ratings

The Window Energy Rating Scheme (WERS) is accredited by the AFRC – which means that WERS ratings are compliant with the NCC.

Reports are prescribed both the window performance for total window U Value (Uw) and total window Solar Heat Gain Coefficient (SHGCw).

U-value

U-value measures how well a product prevents heat from escaping.

It is a measure of the rate of non-solar heat loss or gain through a material or assembly.

U-value ratings generally fall between 2.0-10.0 W/m2.K for Australian products. The lower the U-value, the greater a window’s resistance to heat and cold flow and the better its insulating value.

Solar Heat Gain Co-efficient (SHGC)

SHGC measures how well a product blocks heat caused by sunlight. SHGC is expressed as a number between 0 and 1. The lower a window’s SHGC, the less solar heat it transmits.

Testing

Tested to AS2047

Under the Building Code of Australia, we are required to produce windows and doors that meet mandatory minimum specifications under Australian Standard (AS) 2047 – including AS1288.

Simulations of High Winds and Driving Rains

AS4420.2 Deflection Test – positive and negative wind pressures are applied to the face of the window to test the maximum deflection under wind load.
AS4420.5 Water Penetration Resistance Test – to verify that no water leaks through the window into the building.

Operating Force Requirement

AS4420.3 Operating Force Test – to verify that an opening sash is capable of opening and closing without undue effort.

Air Infiltration Pressure

AS4220.4 Air In filtration Test – the air leakage of a window is tested to ensure energy and acoustic efficiency.

Ultimate Strength Testing

AS4420.6 Ultimate Strength Test – negative and positive wind pressures are applied to the window to at least 1.5 times the design wind pressure to ensure it does not fail in unusual wind conditions.

Technical Manuals
CAD Drawings

Download CAD Drawing

Please note: file will be in .zip format.

Specifications

Residential Hardware

Related Products

Let’s Start To Connect With Darley Today

null
null

Menu

Login

Register Now Forgot Password ?